JBL Professional Specific FAQ

JBL Professional Specific

Can I suspend TR / MR / SR Series enclosures?
Does positive voltage to the black or red terminal give outward cone/diaphragm motion?
Will JBL give a system recommendation for a specific venue?
What are the differences between the old SR Series and SR Series II?
Where can I get "loop-through" power cables for my EON Powered Series speakers?

Can I suspend TR / MR / SR Series enclosures? TR / MR / SR Series cabinets were NOT designed for fixed installations that require the cabinet to be suspended. The enclosures are NOT reinforced and lack suspension points for fixed installations. Suspending these cabinets represents a serious safety hazard. As an alternative, consider the Sound Power, Marquis or Array Series. These systems have properly designed suspension points installed and are reinforced.

Does positive voltage to the black or red terminal give outward cone / diaphragm motion? In most cases, the black terminal is considered to be the positive terminal. Listed below are drivers with black positive terminals (positive voltage to black terminal gives outward cone/diaphragm motion):

2105H	2118H/J	2123H	2202H	2206G/H/J	2220H	2225H
2226G/H/J	2235H	2240H	2241G/H/J	2245H	2404H	2405H
2426H	2427H/J	2445H/J	2446H/J	2447H/J	2450H/J	2450H/J
2451H/J	2485H/J	2485H/J	2490H/J	E-Series	G125-8	G135-8
LE8T-H

As of a few years ago, JBL Professional began manufacturing transducers with the IEC standard of positive to red. Listed below are some drivers with red positive terminals (positive voltage to red terminal gives outward cone/diaphragm motion):

2025H	2035H	2242H	M121-8	M151-8	2012H	2020H
2227H

When in doubt, consult the specification sheet for the model in question.

Will JBL give a system recommendation for a specific venue? JBL can only provide general system design concepts and comment on existing ideas. We can, however, refer you to a reputable sound engineer or contractor who can design a system for you.

What are the differences between the old SR Series and SR Series II?

Improved crossover networks
Stronger corners and handles
Two upgraded components: the 2417H 1-inch compression driver, and 2119H 8-inch midrange
2446H 2-inch compression drivers have been changed to 1.5-inch 2447H for increased high frequency output and lower throat distortion
Network modifications to convert an old version to a new version are readily available.
Updated networks incorporate Neutrik Speakon connectors as well as ź inch input jacks.

Where can I get "loop-through" power cables for my EON Powered Series speakers? EON powered speakers use a standard IEC male connector for AC power. A female connector is provided for looping AC power through to another EON speaker. JBL Customer Service sells male and female cable-end IEC connectors that can be installed on standard 3 conductor electrical power cable. The parts numbers are CP22S (the female connector) and CP22R (the male connector). Only those with the skill and knowledge to fabricate safe, reliable electric power cables should install these connectors.